Deutsch English

Metal Prep - Gallone (ca. 3,7 l)

Metal Prep - Gallone (ca. 3,7 l)
Zoom image

49,90 EUR

16 % VAT incl. excl. Shipping costs

Shipping time: 1-3 days

13,49 EUR per Liter
Product no.: 40201
Metal Prep - Gallone (ca. 3,7 l)

POR-15® Metal Prep provides the best adhesion for POR-15® Rust Preventive Coating on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15® Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15® Rust Preventive Coating or any other coating. POR-15® Metal Prep is not caustic, corrosive, toxic or flammable.
Formerly PREP & READY

POR-15® Metal Prep Features

Interesting Facts you should know about steel and prepping it before you coat it with POR-15: In every car manufacturing facility, steel in different parts of the car body often comes from different steel mills and different production lots, and the surface texture varies with the condition of the steel mill rolls which cold roll the steel to its final thickness. Also, surface cleanliness varies with the mills cleaning procedures, especially the procedures used to control carbon smut is actually baked onto the steel during the high temperature annealing process which follows rolling. This carbon smut is impossible to remove except by mechanical abrasion. Rust varies with the care taken in handling (1) at the steel mill, (2) during transportation and storage, and (3) during fabrication. Steel stored for a long time with rust inhibiting oil will react to form an incomplete oxide known as oil stain. The result of all this is that ordinary steel varies widely in the manner in which it accepts coatings. Although some commercial steel provides an excellent surface for coatings, you are just as likely to find steel which gives poor adhesion and poor rust resistance, even with good coatings. Often the same mill will produce both very good and very poor surface quality, depending upon a number of uncontrolled factors. Nearly all the above problems can be overcome by using POR-15® Metal Prep before you coat your steel. POR-15® Metal Prep is an inexpensive insurance policy that guarantees perfect adhesion of POR-15® Rust Preventive Coating to any metallic surface every time. Whether you paint your car or your fence or your outdoor furniture, the problems are always the same, because you dont know anything about the steel youre painting or what mill it came from, and you cant learn anything by just looking at it even if you have perfect vision!

Customers who bought this product also bought the following products:

Top Coat Gloss Black SIXPACK(6x 113 ml)

Top Coat Gloss Black SIXPACK(6x 113 ml)

Get maximum convenience and efficiency with a  BLACKCote- SIX PACK

72,50 EUR (16 % VAT incl. excl. Shipping costs)
HighTemp Manifold Gray -Spray

HighTemp Manifold Gray -Spray

36,50 EUR (16 % VAT incl. excl. Shipping costs)
2K Top Coat Clear / GLISTEN PC Quart / ca 946ml

2K Top Coat Clear / GLISTEN PC Quart / ca 946ml

A Brilliant Two-Component Clear Coating

69,00 EUR (16 % VAT incl. excl. Shipping costs)
Foam Brush 25mm

Foam Brush 25mm

1,90 EUR (16 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Wednesday 04 April, 2018.

[<<First] | [<Back] | [Overview] | [Next>] | Product 6 of 7 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Advanced search

we acceppt

Parse Time: 0.113s